Matrix 9 Prerecorded Online Short Course

    6 October, 2025

    Welcome to CADJewellerySkills Matrix 9 Prerecorded Online Short Course!

    The purpose of this video course

    If you are here, I’m assuming you have a legacy license of Matrix 9 CAD and you want to know how to use it for jewellery design. The purpose of this course is the same as it has always been since I ran the first one of these in 2007 – I will teach you how how to be a professional jewellery CAD modelmaker for 3D printing and jewellery manufacturing.

    The 24 videos in this series follow tried and true methods I’ve used with hundreds of jewellers over the past two decades to teach them how to understand and use the tools and interface in Matrix 9. I’m not a fan of teaching individuals recipes for using the software. Instead, I will show you what the tools do and why.

    By the end of all these tutorials, you should have enough of an understanding of the fundamentals of solid and surface modelling in Matrix 9 to be able to start solving your own design problems and building your own original jewellery designs for 3D printing and jewellery manufacture.

    The best way to do this

    To help you get the most out of the class, I would recommend the following:

    • Go through the lessons in order. Later lessons build upon techniques from earlier ones.
    • As you watch the video tutorials, try out for yourself what is being demonstrated. Whenever a tutorial file or image is needed for an exercise, it will be provided as a downloadable file in the lesson.
    • After finishing the video tutorial, do the practice exercise included in each lesson.

    As I am keenly aware that one of the biggest issues with taking an online video course is committing to actually doing it, I would also recommend setting weekly reminders for yourself to take an hour or two and go through at least one tutorial.

    Need any help?

    I consider learning support just as important as the video lessons and practice exercises. So as part of your membership in the Matrix 9 online short course, you also have continued access to email technical support through this contact me page, and I encourage you to take advantage of it. Just send me questions as you have them, and I will answer them as quickly as I am able.

    You’ve taken the first step on a big journey towards becoming a better jeweller! I salute you, and wish you the best.

    Feature - Matrix 9 Pre-recorded Beginners course 09 - CAD Rendering with V-Ray Styles

    Matrix 9 Prerecorded Short Course monthly subscription Membership Required

    You must be a Matrix 9 Prerecorded Short Course monthly subscription member to access this content.

    Join Now

    Already a member? Log in here

    Course Outline

    1. Matrix 9 Essentials 01 - Introduction to the Matrix User Interface Locked
    2. Matrix 9 Essentials 02 - Creating Curves Locked
    3. Matrix 9 Essentials 03 - Snaps, Osnaps, and Project Snap Locked
    4. Matrix 9 Essentials 04 - Tracing a Background Bitmap, Mirror, and Rebuild Locked
    5. Matrix 9 Essentials 05 - Curve Construction and Transformation Commands Locked
    6. Matrix 9 Essentials 06 - Making a Ring with Matrix Builders Locked
    7. Matrix 9 Essentials 07 - Booleans Locked
    8. Matrix 9 Essentials 08 - Building a Rubover Set Solitaire Ring Locked
    9. Matrix 9 Essentials 09 - CAD Rendering with V-Ray Locked
    10. Matrix 9 Essentials 10 - Meshing and STL Exporting Locked
    11. Matrix 9 Essentials 11 - Stone Setting Part 1 - Bezels, Revolve, and Rail Revolve Locked
    12. Matrix 9 Essentials 12 - Stone Setting Part 2 - Head Builder, Pipe, and Polar Array Locked
    13. Matrix 9 Essentials 13 - Two Rail Sweep Locked
    14. Matrix 9 Essentials 14 - Making a Pinched Shank Tiffany Solitaire Ring Locked
    15. Matrix 9 Essentials 15 - Loft Locked
    16. Matrix 9 Essentials 16 - Gumball and Match Attributes Locked
    17. Matrix 9 Essentials 17 - Gem on Curve and Object on Curve Locked
    18. Matrix 9 Essentials 18 - Channel Settings, Gem Cutters, and Quad Flip Locked
    19. Matrix 9 Essentials 19 - Curve From 2 Views and Bombe Ring Locked
    20. Matrix 9 Essentials 20 - Pave Tools and Gem on Surface Locked
    21. Matrix 9 Essentials 21 - Universal Deform Tools Locked
    22. Matrix 9 Essentials 22 - NURBS Surface Modelling Locked
    23. Matrix 9 Essentials 23 - Signet Ring Builder and Surface Pullback Locked
    24. Matrix 9 Essentials 24 - Matrix Art Locked
    WRITTEN BY

    Jack Meyer

    Bespoke jewellery designer and jewellery technology educator, providing jewellery CAD and design training since 2006.

    Related Posts

    What to do when a customer’s AI jewellery image cannot be made
    10 November, 2026

    Today, I’d like to talk about what to do when a customer brings in an AI-generated jewellery image and expects you to make it. Tell me if

    READ MORE
    My Eulogy for the British Academy of Jewellery
    11 September, 2026

    The British Academy of Jewellery closed its doors recently. This is my offer of condolences and support to the teachers and students.

    READ MORE